Opens in a new tab
Box Trucks · Delivery Rigs · USDOT

High-Impact Box Truck Wraps & Fleet Lettering.

Your 14ft to 26ft box truck delivers over 300 square feet of mobile outdoor billboard space per side on NYC bridges and avenues. We wrap riveted aluminum, smooth FRP panels, rear roll-up doors, and cab compliance lettering cleanly.

Surfaces
FRP Smooth Box & Riveted Aluminum Panels
Vinyl Tech
Cast Micro-Comply Over Rivets + UV Overlam
Rear Doors
Full Roll-Up Hinge Slats Trimmed & Sealed
Starting Budget
From $950 Cab/Side Kit / $3,200+ Box Wrap
Truck Sizes & Box Panel Constructions

Built for Tough Routes, Docks & Roll-Up Gates

Flat box truck panels look straightforward until you hit dome rivets, extruded top rails, and roll-up hinges. We prep every seam so edges never lift.

Smooth FRP Full Box Wrap

Seamless printed graphics across fiberglass-reinforced plywood box walls with crisp trim-out around corner aluminum extrusions and clearance lamps.

  • Zero Rivet Bubbles
  • 12ft to 26ft Boxes
  • Satin or Gloss Lam

Riveted Aluminum Panel Wraps

Cast vinyl engineered to conform tight over bucked aluminum seam rivets using specialized roller heat-setting—never bridging or tenting.

  • Micro-Air Cast Film
  • Post-Heated Rivets
  • Edge-Seal Primer

Roll-Up Gate & Cab Compliance

Rear tailgate doors see the most eyes in traffic stops—we slice roll-up hinge seams cleanly and apply legal USDOT, MC, tare, and weight specs on cab doors.

  • Roll-Up Hinged Slats
  • USDOT / NYCDOT Spec
  • High-Vis Tail Stripes
Truck Wrap Planning Matrix

Box Truck Coverage Options & Scheduling

Plan fleet rotation cleanly around Brooklyn warehouse bay times.

Rig ConfigurationCoverage ScopeTurnaroundPricing Tier
Cut-Vinyl Box + Cab DOTLogo panels on left/right sides, rear logo, cab USDOT1 DayFrom $950
Partial 14–16ft Box WrapPrinted rear/mid section + cut lettering forward2 DaysFrom $2,100
Full 14–16ft Box WrapBoth sides + rear roll-up door + front nose cap3–4 DaysFrom $3,200
Full 20–26ft Box WrapMaximum print square footage + rivet conformity4–5 DaysFrom $4,400+
Brooklyn Fabrication & Field Installation

Industrial Bay Install With Minimal Route Loss

We print and laminate in advance so your truck only rests indoors during final install.

01

Exact Box Measurement

We check box length, height, nose overhang, liftgate clearances, and FRP vs riveted siding.

02

Scaled Pre-Press Proof

We send flat elevations placing logos cleanly above rub rails and around fuel/E-track seams.

03

Advance Laminate & Print

Panels print in-house at our Brooklyn shop while your truck keeps delivering freight.

04

Targeted Bay Install

Degrease, strip rivets, install panels, slice roll-up slats, and cure edges indoors.

Free Wall Mockup & Written Quote

Price Your Box Truck Wrap or Fleet Rebrand

Tell us your box length (12ft–26ft), wall material (smooth vs riveted), and whether roll-up door graphics are needed.

  • Off-Hour / Weekend Drop Coordination Let us schedule Friday drops so your truck hits Monday routes freshly wrapped.
  • Multi-Truck Discounting Shared print setups lower per-rig cost across multi-vehicle delivery fleets.
  • High-Traffic Bridge & BQE Impact Clean single-message layouts readable at 45 MPH—logo, core offer, URL, and big phone number.

Box Truck Wrap Estimate

Include box length and number of trucks in your fleet.

Common Questions

Box Truck Wrap FAQs

Important details about riveted walls, roll-up rear gates, and panel care.

Yes. We use specialized cast vinyl formulated for rivet conformity, post-heated and roller-sealed around every rivet head so air pockets don't return.
Yes. We slice cleanly along every hinge channel and wrap each slat individually with edge sealer so opening the rear door never rips graphics.
Half-wraps or large printed side decals paired with die-cut lettering use the truck's bright white box as clean negative space, saving 30–40% while maximizing legibility.
Give cast vinyl 7 days to reach full bond strength, and keep pressure nozzles at least 18–24 inches back at room-temperature wash settings afterward.
Yes, we offer full old-graphic stripping, adhesive solvent removal, and metal surface conditioning before fresh graphics go down.
Yes, we integrate compliant regulatory cab door specs seamlessly alongside your main truck layout.

Make Every NYC Delivery Mile Count

Request an estimate for one box truck or your entire tri-state delivery fleet.