Opens in a new tab
Pedestrian Visibility · Double-Sided

Projecting Blade Signs for High-Foot-Traffic Streets.

Turn sidewalk passersby blocks away toward your door. We weld steel scroll brackets, powder-coated architectural flags, and push-through illuminated double-sided blade cabinets sized for NYC Zoning Resolution projection limits.

Projection Limit
18" Typical Double-Sided ZR Max
Min Clearance
8 ft+ Above Sidewalk Grade
Bracket Steel
3/8" Laser-Cut Powder-Coated Plate
Starting Budget
From $950 Non-Lit / $1,450 Lit
Storefront Flag & Bracket Systems

Engineered for Sidewalk Wind Loads & NYC Codes

Every blade sign we fabricate is gusset-welded, finished in exterior marine/automotive coatings, and sized for local pedestrian clearance.

Architectural Flat Flag Blades

3/16" to 1/4" solid aluminum panels or stacked dimensional plaque blades with UV flatbed print or 3M reflective cut vinyl on both faces.

  • 18" × 24" or 18" × 30"
  • ZERO Light Wiring
  • 1-Week Turnaround

Illuminated Cabinet & Push-Thru Blades

Double-sided extruded aluminum drums, ovals, or squares with routed push-through 1/2" acrylic copy and sealed dusk-to-dawn LED lighting.

  • UL 48 Certified
  • Square, Round or Custom
  • Concealed Wall Plate

Landmark Steel & Cast-Iron Brackets

Clean geometric or traditional scrolled bracket arms designed for Soho, Brooklyn Heights, Park Slope, and Cobble Hill historic facades.

  • LPC Proportions
  • Galvanized + Matte Black
  • Stainless Lag Anchors
Blade Format Matrix

Comparing NYC Blade Sign Styles

Choose the balance of night visibility, projection footprint, and landlord simplicity that fits your block.

Blade FormatMaterial & LightingTypical DimensionsZoning NotesIdeal Storefront
Flat Powder-Coated Flag1/4" Aluminum + UV graphics (non-lit)18" W × 18"–30" HChecks 18" ZR projectionCafes, studios, salons, quick turnarounds
Round / Square Lighted DrumWelded cabinet + LED acrylic faces20"–24" W × 24" HNeeds low-volt transformer + permitBars, pharmacies, evening boutiques
Historic Bracket & OvalForged steel arm + carved PVC/HDU18" W × 22" HFriendly to LPC staff reviewBrownstones, legal/medical offices
Sidewalk A-Frame CompanionHeavy weighted steel frame + interchangeable face24" W × 36" HRemovable curb placementRestaurants, galleries, daily specials
Brooklyn Fabrication & Field Installation

How We Fabricate & Anchor Blade Brackets

Because double-sided blades act as sails in alley gusts, proper wall framing and stainless hardware matter most.

01

Mount Point Assessment

We inspect facade brick, granite pilasters, steel storefront mullions, and interior access for thru-bolting or epoxy anchors.

02

18" ZR Clearance Check

Under NYC ZR 32-652 most double-sided projecting signs cap at 18 inches projection past the street line above 8 ft clear height.

03

Steel Gusset Welding

In our Brooklyn shop we TIG/MIG-weld backing plates and stiffener tabs, then powder coat for salt and moisture protection.

04

Level Sidewalk Install

We mount plumb over pedestrian corridors with stainless Tamper-resistant fasteners and weather-sealed silicone perimeter beads.

Free Wall Mockup & Written Quote

Request a Projecting Blade Sign Mockup

Upload a photo of your entry pier or awning frieze and tell us your ideal size or shape.

  • 18-Inch Projection Awareness Saves headaches during landlord and DOB plan review on C1/C2 neighborhood streets.
  • Two-Sided Day & Night Pop Contrasting black-on-white or matte forest-on-brass keeps copy readable from two blocks away.
  • Zero Rust Tears on Masonry Marine-grade aluminum and 316 stainless hardware never bleed rust streaks down limestone piers.

Blade Sign Quote Request

Let us know if you need illuminated or non-illuminated fabrication.

Common Questions

Blade Sign FAQs

Clear answers on NYC projection caps, brick mounting, and lighting options.

In most commercial districts (ZR 32-652), double-sided perpendicular signs may project up to 18 inches beyond the street line while flat wall signs cap at 12 inches.
Standard practice and building code safety clearances keep the bottom edge of projecting signs at least 8 feet above the sidewalk surface so pedestrians pass freely.
Yes. We custom-size the steel wall baseplate to match your brick pilaster width and set expansion or epoxy anchors directly into solid masonry mortar or backing framing.
Solid matte aluminum cabinets with pushed-through 1/2" frosted acrylic letters look cleanest and prevent glaring hot spots along high-end retail streets.
Yes. If you have a sound UL-listed cabinet or iron arm, we can re-face or upgrade internal ballast tubes to crisp 24V LED arrays.
Custom flat or dimensional aluminum flag blades typically fabricate within 5 to 8 business days after proof approval.

Stand Out to Sidewalk Foot Traffic

Send your facade photo to get an 18-inch zoning check and blade bracket mockup.